In-Water Cathodic Protection (CP) Audits — Piraeus

A cathodic protection system on a steel pier or piling only works if the anodes are actually protecting the structure — which requires an in-water voltage potential survey to confirm, not an assumption based on anode age. We run a CP probe survey across the structure and link every reading directly to its location on the 3D infrastructure model, so an operator can see which sections are adequately protected and which anodes need replacement at a glance, not buried in a table.

Why it matters in Piraeus

Greece's largest port and one of the busiest passenger ports in the world, handling container, ferry, and cruise traffic through the same harbor complex.

That volume of commercial and passenger vessel traffic through one harbor creates constant, real demand for in-water hull inspection and quay/berth infrastructure monitoring.

Deliverable

A CP survey report with voltage readings mapped onto the 3D structure model, flagging under-protected areas.

Full step-by-step methodology on the In-Water Cathodic Protection (CP) Audits overview — the same process, run out of the Piraeus area.

Working in the Piraeus area

If there's a in-water cathodic protection (cp) audits requirement in the Piraeus area — a single job or an ongoing programme — get in touch to discuss scope and timing.